HP zl User Manual

52
3. Enter the global-configuration mode.
4. Enter the
username command with the name of the user, the community-string keyword,
and the new community string to assign this user.
In the example above,
ib-admin is the name of the user, community-string is a mandatory
keyword.
ib-commStr is the SNMP community string the user will have to use to begin Element
Manager sessions or execute other SNMP functions.
Switching User Identity
One of the following scenarios may make it necessary to change your user identity during a CLI
session:
• you created a new user account and you want to verify the access privileges
• you have multiple administrative user-accounts and you want to switch to another administrative
area
To change your user identity:
1. Enter the user-execute or privileged-execute mode.
2. Enter the
login command with the name of a Topspin system user.
3. Enter the user password.
After you enter the password, you are logged in as the specified user in the user-execute mode.
Changing Privilege Access-Levels
1. Log in as the unrestricted user.
Only a user with unrestricted permissions may create and modify user accounts.
2. Enter the privileged-user mode.
3. Enter the global-configuration mode.
4. Enter the
username command with the name of the user, the privilege keyword, and the
privileges to assign this user. For example:
Topspin-360# configure
Topspin-360(config)#
Topspin-360(config)# username ib-admin community-string ib-commStr
Topspin-90# login admin
Password: xxxxx
Topspin-90>
Topspin-360# Login: super
Password: xxxx
Topspin-360>
Topspin-360> enable
Topspin-360#
Topspin-360# configure
Topspin-360(config)#
Topspin-360(config)# username ib-admin privilege ib-rw ip-ethernet-ro
fc-rw

HP zl Specifications

General

Brand	HP
Model	zl
Category	Switch
Language	English