AP4050DN-HD
Hardware Installation and Maintenance Guide 1 Product Overview
Issue 01 (2016-04-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2
Figure 1-1 Appearance of the AP4050DN-HD
Table 1-1 describes interfaces on the AP4050DN-HD.
Table 1-1 Interface description
No. Name Description
1 Default Reset button: restores factory settings and restarts the
device if you hold down the button more than 3 seconds.
2 CONSOLE Connects to a maintenance terminal for AP configuration
and management.
3 GE1/PoE_OU
T
10/100/1000M port: connects to the wired Ethernet and
supports PoE output.
4 GE0/PoE_IN 10/100/1000M port: connects to the wired Ethernet. The
port can connect to a PoE power supply to provide power
for the AP.
5 DC 12V DC power socket: connects a 12 V power adapter to the
AP.
6 Security slot Connects to a security lock.
Connects to a power supply. The AP supports the following power supply modes:PoE power supply
and DC power supply.
When the AP uses the DC power supply, use a power adapter for power supply; otherwise, the AP
may be damaged.
1.2 Indicator Description
The AP4050DN-HD provides only a single indicator, as shown in Figure 1-2.
Indicator colors may vary slightly at different temperature.
To Next Page
Loading...
Need help?
General
