AP4050DN-HD
Hardware Installation and Maintenance Guide 2 AP Installation
Issue 01 (2016-04-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
20
5. Loosen the two screws at the horizontal direction, adjust the AP's angle at the horizontal
and vertical directions, and tighten the hex socket screws. Use M4x35 cruciform slot
screws to tighten the AP and mounting bracket from the side.
2.6 Cable Connection
Figure 2-3 describes the cable connections.
Figure 2-3 Appearance of the AP4050DN-HD
Table 2-3 Cable connections
No. Cable or Device
Description
1 Network cable
CAT5E cables or higher must be used.
The service network cable cannot be connected to the
console port; otherwise, the AP may be damaged
when using PoE power supply. The network cable
To Next Page
Loading...
Need help?
General
