User Manual
EchoLife HG520 Home Gateway
Chapter 6 Wireless Setup
Huawei Technologies Proprietary
66
Figure 6-6 Wireless Setup – Security – WPA-PSK
1) To enable WPA-PSK, select “WPA-PSK” in “Network
Authentication”.
2) Enter 8 to 63 ASCII codes or 64 hexadecimal (0-9, A-F)
digits in “WPA Pre-Shared Key”.
3) Click <Save/Apply> to save the configuration.
6.3 Configuring MAC Filter
Wireless MAC filter allows you to implement access control
based on device’s MAC address.
To Next Page
Loading...
Need help?
General