Step 7 In the displayed dialog box, enter the upgrade password and click OK.
----End
Upgrading Multiple TE30s in Batches
You can upgrade multiple TE30s in batches using the upgrade program installed on a computer.
Procedure
Step 1 Power on the computer and TE30.
Step 2 Extract the compressed software upgrade package on the computer.
Step 3 Run UpgMaster.exe to display the window shown in Figure 13-2.
Step 4 Click Browser and select the Telepresence.dat file.
Step 5 Click to display the window as shown in Figure 13-2.
Figure 13-2 Upgrading multiple TE30s in batches
Step 6 In the area circled in red and marked as 1, enter the number of the TE30s you with to upgrade,
for example, 3.
Step 7 In the area circled in red and marked as 3, enter the IP addresses of the TE30s you wish to
upgrade.
HUAWEI TE30 Videoconferencing Endpoint
User Guide 13 Maintenance
Issue 01 (2013-03-27) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
120
To Next Page
Loading...
Need help?
General
