• The watch does not come with a power adapter. For details about power adapters that
are compatible with your watch, see the product specication list. You are advised to
use a Huawei power adapter, a computer USB port, or a non-Huawei power adapter
that complies with corresponding regional or national laws and regulations as well as
regional and international safety standards to charge your watch.
• Other chargers and power banks that do not meet corresponding safety standards may
cause issues such as slow charging and overheating. Exercise caution when using them.
It is recommended that you purchase a Huawei power adapter from an ocial Huawei
sales outlet.
• Keep the charging port dry and clean to prevent short circuits or other risks.
• When wireless charging is used for your watch, use the dedicated charging cradle and
make sure that the watch coil is aligned with that of the charging cradle. If a non-
dedicated charging cradle is used and the watch coil is not aligned with that of the
charging cradle, the charging eciency will deteriorate and issues such as overheating
will occur.
• Only the HUAWEI WATCH GT 2 Pro and PORSCHE DESIGN HUAWEI WATCH GT 2
support reverse charging from phones. The phone models that support this feature are
as follows: HUAWEI Mate 20 Pro, HUAWEI Mate 30, HUAWEI Mate 30 Pro, HUAWEI
Mate 30E Pro, HUAWEI Mate 40 Pro, HUAWEI Mate 40 Pro+, HUAWEI P30 Pro,
HUAWEI P40 Pro, HUAWEI P40 Pro+, HONOR V30 Pro, and HONOR 30 Pro+. You can
also use a HUAWEI Wireless Quick Charger, a HUAWEI Wireless Charger, a HUAWEI
SuperCharge Wireless Charger, or a HUAWEI SuperCharge Wireless Charger Stand to
charge your watch. If you use a non-dedicated charging cradle to charge your watch,
place your watch in the center area of the charging cradle, otherwise the watch may
be powered o due to a protection mechanism that prevents overheating.
• The charging cradle tends to attract metal objects due to the magnets inside it.
Therefore, it is necessary to check and clean it before using it. In addition, it is
recommended that you use the charger in an environment with an appropriate
ambient temperature to prevent issues such as degaussing of the charging cradle.
Charging time
It takes about 120 minutes to fully charge the battery. Disconnect your watch from the power
adapter once it is fully charged.
To protect the battery, the charging current will be reduced if the ambient temperature is
low. This will prolong the charging time without aecting the battery lifespan.
Checking the battery level
Method 1: Connect your watch to a power supply and check the battery level on the
charging screen.
Method 2: Swipe down from the top of the home screen to check the battery level.
Getting started
6
To Next Page
Loading...
Need help?
General
