Huawei NE40E-X1 User Manual

Table 4-4 Technical specifications of the NE40E-X2 and cabinet ground cable
Item Description
PGND cable Terminal Naked Crimping Terminal,OT,10mm^2,M6,Tin
Plating,Naked Ring Terminal
Cable type Power Cable,-450/750V,H07Z-K UL3386,10mm^2,oli-
vine
Fireproof class CM
4.3 Console Port Cable
This section describes the structure and technical specifications of the console interface cable.
4.3.1 Introduction
The console interface cable is used to connect the console interface on the NE40E to the serial
interface of the console to transmit configuration data of the NE40E.
The console interface cable is an 8-core shielded cable. One end of the cable is an RJ45 connector
connected to the console interface on the MPU. The other end has DB9 and DB25 connectors,
either of which is connected to the serial interface on a computer.
4.3.2 Structure
Figure 4-1 shows the structure of a console interface cable. Table 4-5 shows the pin assignment
on the console interface cable.
Figure 4-1 Console interface cable
1. Direction A
2. DB25 female connector 3. Label 4. RJ45 connector
5. Direction B 6. Direction C 7. DB9 female connector W1 and W2 communication cable
HUAWEI NE40E-X1 & NE40E-X2 Universal Service
Router
Hardware Description 4 Cables
Issue 02 (2011-09-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
76

Huawei NE40E-X1 Specifications

General

Brand	Huawei
Model	NE40E-X1
Category	Wireless Router
Language	English