20
address of the PT530 in router mode to 192.168.*.1("*" is any integer from 1 to 255,
except 33). For details, see chapter 5.2 Changing the IP Address Used to Log In to the Web
Management Page.
Bridge Mode
The PT530's default working mode is bridge, and you do not need to configure the Internet
connection parameters of the PT530. If you need to setup a wireless connection to the
PT530, you can set the wireless connection parameters referring to the following steps.
1. Open a browser on your computer. In the address box, enter 192.168.33.1. Press Enter
to access the web management page.
2. On the login page, enter the login user name (admin by default) and password (admin
by default). Click Login.
To protect against unauthorized access, change the user name and password after the first
login.
3. In the navigation tree, choose SETUP > Wireless Setup.
4. Enter the SSID (WLAN name) and key you specified into the Wireless Name (SSID) and
PassPhrase.
5. Click Apply.
To Next Page
Need help?
General
