----End
7.2 (Optional) Installing a Smart Dongle
Communication parameters have been set for the solar inverter.
Step 1 Install the SIM card.
● If the Smart Dongle is congured with a SIM card, you do not need to perform this step.
● If the Smart Dongle is not
congured with a SIM card, you need to prepare a standard
SIM card (size: 25 mm x 15 mm; capacity: ≥ 64 KB).
● When installing the SIM card, determine its installation direction based on the silk
screen and arrow on the card slot.
● Press the SIM card in place to lock it. In this case, the SIM card is correctly installed.
● When removing the SIM card, push it inward to eject it.
● When reinstalling the cover of the Smart Dongle, ensure that the buckle springs back in
place.
Step 2 Secure the Smart Dongle.
Figure 7-17 Installing the Smart Dongle
----End
7.3 Operations with a USB Flash Drive
USB ash drives of SanDisk, Netac, and Kingston are recommended. Other brands
may be incompatible.
Delete the script le immediately after use to reduce information disclosure risks.
SUN2000-(75KTL, 100KTL, 110KTL, 125KTL) Series
User Manual 7 Man-Machine Interactions
Issue 11 (2021-11-10) Copyright © Huawei Technologies Co., Ltd. 100
To Next Page
Loading...
Need help?
General