● SUN2000 app: Log in to Huawei AppGallery (https://appstore.huawei.com),
search for SUN2000, and download the app installation package. You can also
scan the QR code (https://appgallery.cloud.huawei.com/appdl/C10279542) to
download the installation package.
QR code:
7.1.3 Logging In to the App
Prerequisites
● The DC or AC side of the SUN2000 has been energized.
● Connection over a WLAN module or a Bluetooth module:
a. The WLAN module or Bluetooth module is connected to the USB port at
the bottom of the SUN2000.
b. The WLAN or Bluetooth function is enabled.
c. Keep the mobile phone within 5 m from the SUN2000. Otherwise, the
communication between them would be
aected.
● Connection over a USB cable:
a. The USB data cable is connected from the USB port at the bottom of the
SUN2000 to the port on the mobile phone.
b. If the USB data cable is successfully connected, the message Connected
to USB Accessory will pop up on the phone. Otherwise, the cable is not
connected.
Procedure
1. Run the app and select a connection mode.
SUN2000-(75KTL, 100KTL, 110KTL, 125KTL) Series
User Manual 7 Man-Machine Interactions
Issue 11 (2021-11-10) Copyright © Huawei Technologies Co., Ltd. 74
To Next Page
Need help?
General