Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Any residual voltage in the
SUN2000 takes 5 minutes
to fully discharge.
The SUN2000 must not be
touched when in operation
because its enclosure and
heat sinks are extremely
hot.
Remind operators to refer to
the documentation shipped
with the SUN2000.
The SUN2000 must be
connected to a ground bar
for grounding purposes.
The DC input connector
must not be removed when
the SUN2000 is in
operation.
Nameplate
Figure 2-7 shows the SUN2000 nameplate, which contains the model information, technical
specifications, and compliance symbols.
Figure 2-7 Nameplate
(1) Trademark, product name, and model
number
(2) Technical specifications
(4) Company name and country of
manufacture
To Next Page
Loading...
Need help?
General