Use a text editor to open file A. Based on the notes of the parameters in the file, modify file A
so that it applies to endpoint B. Save the modified file as file B.
Importing the Address Book
To import the address book to endpoint B:
Step 1 Log in to the web interface of endpoint B. Choose Address Book > Address Book.
Step 2 Select Import to Local Address Book and select file B to import.
Step 3 Select Import.
----End
11.4.2 Importing and Exporting Settings
On the TE30 web interface, you can import and export settings. If your TE30 is restored to its
default settings, you can import previously exported settings.
Procedure
Step 1 Log in to the TE30 web interface. Choose System Settings > Installation.
The Installation page is displayed.
Step 2 Select Import/Export Settings.
The Import/Export Settings page is displayed.
Step 3 Select Export Settings to export or Import Settings to import.
----End
11.4.3 Importing License Files
Some functions, such as Wi-Fi and recording, on your TE30 require license files. To use these
functions, you must import the required license files.
Prerequisites
You have obtained the latest license files.
NOTE
Using your contract number and device serial number, you can download license files from http://
enterprise.huawei.com.
Background
Your TE30 can start properly even if no license file is loaded on it or the loaded license file
expires. After the TE30 starts, you can set parameters, import license files, upgrade software,
and place calls at a rate of up to 768 kbit/s.
After a license file is updated, the original license file expires. For example, after you purchase
an official license, the trial license expires.
HUAWEI TE30 Videoconferencing Endpoint
User Guide 11 Web-based Remote Management
Issue 01 (2013-03-27) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
95
To Next Page
Loading...
Need help?
General
