Upgrade Method Description
Upgrade from the
TE30 web interface
On the TE30 web interface, manually upgrade the TE30 or set it to
upgrade automatically. For details, see 13.2.4 Upgrading the TE30
on Its Web Interface.
Before the upgrade, complete the following:
l Read the Release Notes to understand the contents to be upgraded and precautions required
to be taken during the upgrade.
l Obtain the current software version.
l Back up the settings on the TE30, such as the communication settings and address book.
13.2.1 Automatic Upgrade
With the automatic upgrade function enabled and automatic upgrade parameters set, your TE30
obtains upgrade files from the specified server and installs the upgrade files when the preset
upgrade interval arrives.
Procedure
Step 1 Choose Advanced Settings > Settings > Installation > Auto Upgrade Settings.
Step 2 Set the automatic upgrade parameters by referring to Table 13-3.
Table 13-3 Automatic upgrade parameters
Parameter
Description Setting
Auto upgrade Specifies whether the automatic
upgrade function is enabled. If you
select this parameter, you must also set
Upgrade interval, Server address,
User name, and Password. Your TE30
will obtain upgrade files from the
specified server and install them when
the preset upgrade interval is reached.
This parameter is
deselected by default.
Enable wireless MIC
auto update
Specifies whether to automatically
update the wireless microphone after it
is connected to the TE30.
This parameter is
selected by default.
Upgrade interval Specifies the upgrade interval. The default value is 0.5
h.
Value range: 0.5 h to 24
h.
Server address Specifies the IP address of the server that
stores the upgrade files for your TE30.
This parameter cannot be
left blank.
Example: http://
200.55.55.100/
HUAWEI TE30 Videoconferencing Endpoint
User Guide 13 Maintenance
Issue 01 (2013-03-27) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
118
To Next Page
Loading...
Need help?
General
