4.1 Configuring Video Output
After connecting all the video cables, set the video output parameters, such as output mode,
resolution, refresh rate, and stretch mode.
Background
Your TE30 has two video output ports: VGA OUT and MAIN OUT HD. The MAIN OUT HD
port connects to the HDMI connector of the integrated cable.
Video is sharper at a higher resolution. Select the video resolution that matches the resolution
of the monitor connected to your TE30.
Table 4-1 lists the resolutions supported by the video output ports in each output mode.
Table 4-1 Available video resolutions in each output mode
Output Mode Video Resolution
VGA OUT
VGA 800 x 600 pixels, 1024 x 768 pixels, 1280 x 1024 pixels, 720p and 1080p
YPrPb 720p and 1080p
MAIN OUT HD
DVI 1024 x 768 pixels, 1280 x 1024 pixels, 720p, and 1080p
HDMI 720p and 1080p
Video is smoother at a higher refresh rate. Select the refresh rate that matches the refresh rate
of the monitor connected to your TE30. Table 4-2 lists the refresh rates available for each video
resolution.
Table 4-2 Available refresh rates for each resolution
Video
Resolution
Refresh Rate (Hz)
800 x 600 pixels 56, 60, 72, 75, or 85
1024 x 768
pixels
60, 70, 75, or 85
1280 x 1024
pixels
60, 75, or 85
720p
l 60 if the output mode is VGA
l 50 or 60 if the output mode is DVI, YPrPb, or HDMI
HUAWEI TE30 Videoconferencing Endpoint
User Guide 4 Display and Camera
Issue 01 (2013-03-27) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
29
To Next Page
Loading...
Need help?
General
