29
Controlling Computer Bandwidth
By configuring bandwidth control policies, you can control the bandwidth of computers connected to
the WS330 in the following ways:
> Determine the minimum bandwidth allocated to specific computers to help ensure the Internet
access speed for those computers.
> Determine the maximum bandwidth certain computers can occupy so that bandwidth remains
available to other computers.
1. Log in to the web management page.
2. Choose Internet tab.
3. In the navigation tree, choose Bandwidth Control.
4. Select Bandwidth Control configuration page.
5. Set Enable bandwidth control to Enable.
6. In Egress bandwidth and Ingress bandwidth, enter the rate value you specified.
7. Click Save.
You can configure different bandwidth control policies for different computers.
The configuration procedure is as follows:
To Next Page
Loading...
Need help?
General
