EasyManuals Logo
Home>Hunter>Controller>XC

Hunter XC User Manual

Hunter XC
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
Eliminating a Program Start Time
With the dial set to START TIMES position,
push the or button until you reach
12:00 AM (Midnight). From here push the
button once to reach the OFF position.
Setting Station Run Times
1. Turn the dial to Run Times position.
2. The display will show the last program
selected (A, B, or C), the station number
selected, icon, and the station will be
flashing. You can switch to another pro-
gram by pressing the button.
4.
Use the
or
button to change the station run time on the
display. You can set the run times from 0 to 4 hours.
5. Press the button to advance to the next station.
Setting Days To Water
1. Turn the dial to the WATER DAYS position.
2. The display will show the last program se-
lected (A, B, or C). You can switch to another
program by pressing the button.
4.
The controller will display the seven days of the week (MO, TU,
WE, TH, FR, SA, SU). Each day will have a icon or a icon above
the day. The icon would represent an On” water day, while a
icon would represent an Off” watering day.
Selecting Specific Days of the Week to Water
1. With the cursor on a specific day
(the cursor will always start with MO), press
the button to activate a particular
day of the week to water. Press the
button to cancel watering for that day. After pressi
ng a button the
cursor automatically advances to the next day.
2. Repeat step 1 until all desired days have been selected. The
selected days will show a to indicate their status is ON. The last is
the last day of watering for that program.
Selecting Odd or Even Days to Water
This feature uses numbered day(s) of the month for watering instead
of specific days of the week (odd days: 1st, 3rd, 5th, etc.; even days:
2nd, 4th, 6th, etc.).
1.
With the cursor on Su press the
button
once. The icon and odd will be displayed.
2. If odd day watering is desired, turn the dial
back to the run position.
3. If even day watering is desired, press the
button once. The icon and
EVEN
will be
displayed. You can move back and forth from
ODD to EVEN by pressing the and buttons.
NOTE: The 31st of any month and February 29th are
always “off days if Odd watering is selected.
E v e n
2 , 4 , . . . 3 0
Ev en D ay W a te ring

Other manuals for Hunter XC

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hunter XC and is the answer not in the manual?

Hunter XC Specifications

General IconGeneral
BrandHunter
ModelXC
CategoryController
LanguageEnglish

Related product manuals