English – 61
TECHNICAL DATA
Technical data
FS5000 D
Saw feature 14/350 500/20 26/650 30/750 36/900
Blade guard capacity, inch/mm 14/350 20/500 26/650 30/750 36/900
Maximum cutting depth, inch/mm 4,75/118 7,75/193 10,5/262 12,5/312 15/374
Blade shaft, rpm 3197 2400 1866 1628 1355
Approximate blade shaft output, hp/kW 42/31
Arbor size, inch/mm 1/25,4 with single drive pin
Quick disconnect blade flange Ø, inch/mm 4,5/114,5 4,5/114,5 5/127 5/127 6/152,5
Blade shaft diameter, inch/mm 2-1/8 / 54
Blade shaft bearings Cast sealed blade shaft with 2 maintenance-free ball bearings
Blade shaft drive Dual 3-rib banded 3VX V-belts per side (12 ribs total)
Blade coolant Zinc plated dual multiple-jet water spray tubes
Blade guard attachment Slip-on, auto-latch
Blade control
Electro-hydraulic pump raises blade; Switch controlled raise/lower on speed control
handle; Software controlled depth stop and cutting depth indicator; Blade drive
disengagement system (clutch); Quick disconnect blade flanges
Axle Ø, inch/mm
Front, 1/25,4
Rear, easy adjust center pivot with 2 hydraulic powered wheel motors
Wheels, inch/mm
Front, 8x3x1/203x76x25, thick polyurethane tread, sealed ball bearing requiring
less maintenance
Rear, 10x3x1.25/254x76x32, solid rubber, quick disconnect
Transmission
Hydrostatic pump, with 2 hydraulic wheel motors connected with hoses,neutral start
switch, single handle speed control, hydraulic bypass valve for pushing
Max. ground speed
Infinitely variable: 0-122 fpm / 0-37m/min forward and reverse. 25m/min maximum
reverse speed on CE models
Chassis Heavy duty, rigid, box and channel section construction
Weight (uncrated), Ib/kg 1656/751 1667/756 1678/761 1687/765 1700/771
Maximum operating mass, Ib/kg 1744/791 1761/799 1781/808 1801/817 1828/829
To Next Page
Loading...
Need help?
General