EasyManuals Logo

Husqvarna Rider 11 Bio User Manual

Husqvarna Rider 11 Bio
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
26 English
8009-402
8009-403
8009-404
8009-405
MAINTENANCE
Replacement of the fuel filter
Replace the pipe fitted fuel filter every 100 running
hours (once per season) or more frequently if it is
clogged.
Replace the filter as follows:
1. Raise the engine cover.
2. Move the hose clips away from the filter. Use a
pair of flat pliers.
3. Pull off the filter from the hose ends.
4. Press in the new filter on the hose ends. If
necessary soap solution can be applied on the
filter ends to simplify fitting.
5. Push the hose clips back on the filter.
2. Pull the throttle wires outer casing to the far
right and check that the choke is fully activated.
3. Tighten the clamping screw.
Adjustment of the
throttle wire
If the engine does not respond as it should when
the throttle lever is moved, or if it produces black
smoke or does not reach top speed, the throttle
wire may need adjusting.
1. Release the clamping screw (see arrow) and
push the throttle control to the choke position.
4. Pull the throttle control back to the full throttle
position and check that the choke is no longer
activated.

Table of Contents

Other manuals for Husqvarna Rider 11 Bio

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Husqvarna Rider 11 Bio and is the answer not in the manual?

Husqvarna Rider 11 Bio Specifications

General IconGeneral
BrandHusqvarna
ModelRider 11 Bio
CategoryLawn Mower
LanguageEnglish

Related product manuals