14 – English
PRESENTATION
Fuelling
The engine should be run on 85 octane (or higher)
unleaded petrol/gasoline (no added oil).
Environmentally adapted alkylate fuel, such as
Aspen, is also recommended.
Seat
The seat has a jointed attachment on the front
edge and can be tipped forward.
The seat can also be adjusted lengthways.
Release the knobs under the seat and adjust it
forwards or backwards to the required position.
Lock the setting with the knobs.
Lever for adjustment of cutting height
With this lever the cutting height can be adjusted to
9 different positions (4-90 mm, 45-80 mm Bioclip).
Cutting unit with side/rear ejector, 40-90 mm.
BioClip cutting unit, 45-95 mm.
WARNING!
Petrol/gasoline is highly
inflammable. Observe care and
fill up with fuel outdoors (see
safety instructions).
To Next Page
Loading...
Need help?
General
