36 – English
MAINTENANCE
Checking the blades
To achieve the best mowing results it is important
that the blades are undamaged and well-sharpened.
Check that the blades’ attachment screws are tight.
IMPORTANT INFORMATION
Replacing or sharpening the blades should
be conducted by an authorised service
workshop.
IMPORTANT INFORMATION
On the Bioclip unit the relative positioning
of the blades should always be as shown
in the diagram with an angle of 90°
between the blades. Otherwise the blades
can go against each other and damage
the unit.
BioClip 90
BioClip103
Cutting units with side ejection
Cutting units with rear ejection
The blades should be balanced after sharpening.
Damaged blades should be replaced when hitting
obstacles that result in a breakdown. Let the
servicing dealer judge whether the blade can be
repaired/ground or must be discarded.
To Next Page
Loading...
Need help?
General
