42 – English
Dimensions Rider 16
Length without cutting unit 2145 mm
Width without cutting unit 1050 mm
Height 1060 mm
Service weight 245 kg including cutting unit
Wheel base 855 mm
Track Front 715 mm, rear 625 mm
Tyre size 16 x 6.50 x 8
Tyre pressure, front 60 kPa (0.6 kp/cm
2
)
& rear
Max. gradient 15°
Engine
Manufacture Briggs & Stratton model 28N707
Power 11.4/15.5 kW/h.p.
Displacement 465 cm
3
Fuel Min. 85 octane unleaded
Tank volume 7 litres
Oil SAE 30 or SAE 10W/30 class SF-CC
Oil volume 1.2 litres
Start Electric starter
Electrical system
Type 12 V, negative earth
Battery 12 V. 24 Ah
Spark plug Champion CJ8 or J8, electrode gap = 0.7-0.8 mm
Transmission
Manufacture Tuff Torq K46
Oil SAE 10W/30, class SF-CC
Cutting unit
Type 3-blade unit with side-rear ejection/BioClip
2-blade unit BioClip 900 mm
Cutting width 970 mm, 900mm and 1030 mm (BioClip)
Cutting height 9 pos. 40-90 mm, 45-95 mm (BioClip)
Blade diameter 350 mm, 410 mm (Bioclip)
Noise level 100 dB(A)
TECHNICAL DATA
We reserve the right to change technical specifications without prior notice.
Note that no legal claims are valid on the basis of information in this manual.
Use only genuine parts for repairs. The warranty is not valid if non genuine parts are used.
When this product is worn out or no longer used it should be returned to
the dealer or other appropriate body for recycling.
To Next Page
Loading...
Need help?
General
