SETUP
1
3-6 powermax30 Operator Manual
Extension cord recommendations
Use an extension cord of an appropriate wire size for the cord length and system voltage. Use a
cord that meets national and local codes.
Generator recommendations
When using a generator with the Powermax30, it should produce 240 VAC.
Powermax30 systems with serial numbers below 30-003132 may shut down and show an error
condition (all LEDs flash) when used with a generator that has a higher than normal voltage
(greater than 250 VAC). To avoid shutdown, check your generator’s voltage regulator for proper
operation.
Engine
drive rating
Output
current
Performance
5.5 KW 30 A Full arc stretch
4 KW 25 A Limited arc stretch
Input-
voltage Phase
Recommended
cord gauge size Length
120 VAC
200 – 240 VAC
1
1
12 AWG
14 AWG
Up to 53 ft (16 m)
Up to 133 ft (40.5 m)
PMX30_OM_03.qxp:PMX30_OM_03 10/7/09 12:44 PM Page 3-6
To Next Page
Loading...
Need help?
General
