7-59
Check the weight, length, width and height of the
truck referring to the chapter 8, specifications
when you are going to hoist the truck.
Use long wire rope and stay to keep the distance
with the machine as it should avoid touching with
the truck body.
Put a rubber plate where the wire rope contact
with the truck's body to prevent damage.
Place crane on the proper place.
Install the wire rope and stay like the illustration.
Make sure wire rope is proper size.
Make sure that the truck is shut down before
hoisting. Lift
ing the truck with engine running
can cause serious accident.
The wrong hoisting method or installation
of
wire rope can cause damage to driver and
truck.
Do not load abruptly.
Keep area clear of personnel.
14. LOADING AND UNLOADING BY CRANE
1)
2)
3)
4)
5)
Do not install the wire to unsafe position such
as forks, carriage, head guard, counterweight
lifting h
ole or towing pin, etc.. It can cause
serious injury or damage to driver and truck.
If there is any problem to lift a truck, please
contact your dealer.
Perform the lifting service with skilled service
men
.
To Next Page
Loading...
Need help?
General
