6- 8 WHAT TO DO IN AN EMERGENCY
HLC4008
8. Lower the vehicle to the ground by
using the wheel brace and tighten
the nuts fully by using the wheel
brace.
9. Reinstall wheel cap by fitting the
boss of the wheel cap in the groove
of the wheel, hitting the centre of
the wheel cap with your hand.
(If Installed)
D080A02A-GAT
IF YOUR CAR MUST BE TOWED
CAUTION:
Your car can be damaged if towed
incorrectly!
!
If your car has to be towed, it should be
done by your Hyundai dealer or a
commercial tow truck service. This will
help assure that your car is not dam-
aged in towing. Also, professionals are
HLC4010
10.Check and adjust the air pressure
ensuring that the valve cap is re-
placed afterwards.
11.Return the jack, tool bag and spare
wheel to the luggage compartment.
12.As soon as possible, check the
wheel nut torque and adjust to the
specification listed below:
Wheel nut tightening torque
Steel wheel & aluminium alloy wheel:
900 ~ 1,100 kg.cm (65 ~ 80 lb.ft)
D080A01A
HLC4012
To Next Page
Loading...
Need help?
General
