9- 10 DO-IT-YOURSELF MAINTENANCE
G100B02A-AAT
To Check Transaxle Fluid Level
Park the car on level ground with the
G100B01A
engine off.
1. Using a wrench of the correct size,
loosen the oil filler plug by turning it
counterclockwise and remove it with
your fingers.
2. Use your finger or suitable tool to feel
inside the hole. The oil level should
be at its bottom edge. If it is not,
check for leaks before adding oil. To
refill the transaxle or bring the oil
level up,add oil slowly until it reaches
the proper level. Do not overfill.
3. Replace the plug and washer, screw
it in with your fingers and then tighten
securely with the wrench.
WARNING:
It is always better to check the
transaxle oil level when the engine
is cool or cold. If the engine is hot,
you should exercise great caution
to avoid burning yourself on hot
engine or exhaust parts.
!
G100A03A-DAT
CHECKING THE TRANSAXLE
OIL
G100A01A
Drain plug
Filler plug
Transaxle lubricant in the manual
transaxle should be checked at those
intervals specified in the vehicle main-
tenance schedule in Section 5.
Recommended Oil
Use only HYUNDAI GENUINE PARTS
MTF 75W/85 (API GL-4) in the manual
transaxle.
Manual Transaxle Oil Capacity
The oil capacity of the manual transaxle
is 2.15 litres (2.27 U.S quarts).
To Next Page
Loading...
Need help?
General
