01
1-33
4. Check if there is dust on the charging
connector and charging inlet.
5. Hold the charging connector handle
and connect it to the vehicle charging
inlet. Push the connector all the way
in. If the charging connector and
charging terminal are not connected
properly, this may cause a fire.
Information
Locking Charging Cable
Select ‘Settings → ECO Vehicle →
Charging Connector Locking Mode’ in the
infotainment system menu. The charging
connector is locked in the inlet at a
different period according to which mode
is selected.
• Always mode : The connector locks
when the charging connector is plugged
into the charging inlet.
• While charging mode : The connector
locks when charging starts.
For more details, refer to “Locking
Charging Cable” in this chapter.
6. Connect the charging plug to the
electric outlet at an AC charging
station to start charging.
ONE1Q011041ONE1Q011041
7. Check if the charging connector
indicator light (
) of the high voltage
battery on the instrument cluster is
turned ON. charging connector is not
active when the charging indicator
light (
) is OFF.
When the charging connector and
charging plug are not connected
properly, reconnect the charging
cable to charge.
Information
• Even though charging is possible with
the Start/Stop button in the ON/START
position, for you safety, start charging
when the Start/Stop button is in the
OFF position and the vehicle shifted to
P (Park). After charging has started,
you can use electrical components such
as the radio by pressing the Start/Stop
button to the ACC or ON position.
• During AC charging, the radio
reception may be poor.
• During charging, the gear cannot be
shifted from P (Park) to any other gear.
To Next Page
Loading...
Need help?
General
