Chapter 2: Installation 9
General
• Observe and follow service markings.
• Do not service any switch except as explained in the switch documentation.
• Opening or removing covers that are marked with the triangular symbol with a lightning bolt
might expose you to electrical shock.
• Components inside these compartments should be serviced only by a trained service techni-
cian.
• The rack console switch contains no serviceable components. Do not attempt to open.
• If any of the following conditions occur, unplug the rack console switch from the electrical
outlet and replace the part or contact the trained service provider:
• The power cable, extension cable, or plug is damaged.
• An object has fallen into the product.
• The rack console switch has been exposed to water.
• The rack console switch has been dropped or damaged.
• The rack console switch does not operate correctly when you follow the
operating instructions.
• Keep the rack console switch away from radiators and heat sources. Also, do not block
cooling vents.
• Do not spill food or liquids on the rack console switch components, and never operate the rack
console switch in a wet environment. If the rack console switch gets wet, see the appropriate
section in the troubleshooting guide or contact the trained service provider.
• Use the rack console switch only with approved equipment.
• Enable the rack console switch to cool before removing covers or touching internal compo-
nents.
To Next Page
Loading...
Need help?
General
