10
Edit Q
The
edit
key starts
the
edit
operation
if
the
5100
is
in
the
home
or
scroll state.
To
change
the
data
on
the
input
line
of
the
display screen, use
the
backspace and
forward space keys and
the
insert and delete functions.
To
end
the
edit
operation,
press
the
ATTN
or
EXECUTE key
to
transmit
the
edited
line,
or
press
the
home
key.
Line Delete
During an
edit
operation, pressing
the
line delete key deletes
all
characters
on
the
input
line
to
the
right
of
the
cursor, including
the
character
at
the
cursor position.
Shift Lock
Pressing
the
shift lock key
once
locks
the
keyboard
in
upper shift. The
keyboard
remains locked
in
upper
shift until
you
press
the
shift
lock key again,
the
EXECUTE
or
ATTN key while
the
5100
is
online,
or
press
the
shift key
and
enter
an upper
shift
character.
If
the
last character
transmitted
was a lower shift character, pressing
the
shift lock
key transmits an upper shift
function
character
and
locks
the
keyboard
in
upper
shift.
If
the
last character
transmitted
was an upper
shift
character, pressing
the
shift lock key only locks
the
keyboard
in
upper shift;
no
upper shift
function
character
is
transmitted. When
the
keyboard
is
locked
in
upper shift, pressing
the
shift lock key transmits a lower shift function character and unlocks
the
keyboard.
When
the
keyboard
is
locked in upper shift, pressing
the
shift key with
the
last
character
transmitted
only unlocks
the
keyboard;
no
lower shift function character
is
transmitted.
Tab
Set
Pressing
the
tab
set key sets a
tab
at
the
cursor location;
no
tab
character
is
transmitted. Tabs
cannot
be set
beyond
position 132.
Tab Reset
Pressing
the
tab
reset key clears
the
tab,
if
any,
at
the
cursor position.
No
data
is
transmitted
when this key
is
pressed.
To Next Page
Loading...
Need help?
General