AS/400e server 840 181
AS/400e server 840
A feature cross-reference table can be used to relate the Processor Feature Code to the
Processor and Interactive features visible in the AS/400 configurator. The Processor Feature
Code is found by displaying the QPRCFEAT system value or in the rack configuration. The
Processor Feature Code is used when ordering software license keys.
Processor Group is determined by a combination of the Processor and Interactive Feature.
The following table provides a cross reference.
Main Storage
All main storage cards on the Model 840 must be added in sets of four (quads) of the same
capacity and technology. There are 16 slots available for main storage cards in the Model
840. The slots are arranged in groups of four: AAAA, BBBB, CCCC, and DDDD. The plugging
order for the main storage cards is AAAA, BBBB, CCCC, and then DDDD.
There are no rules regarding the placement of a particular size of main storage card quad
into a card slot group. A quad of any size main storage card may be placed in any of the four
groups of four slots.
The available main storage features are as follows:
Processor Interactive Feature Processor Feature Processor Group
#2418
#1540 #23E8 P40
#1541 #23E9 P50
#1542 #23EA P50
#1543 #23EB P50
#1544 #23EC P50
#1545 #23ED P50
#1546 #23EE P50
#2420
#1540 #23F8 P40
#1541 #23F9 P50
#1542 #23FA P50
#1543 #23FB P50
#1544 #23FC P50
#1545 #23FD P50
#1546 #23FE P50
#1547 #23FF P50
To Next Page
Loading...
Need help?
General