Towers
220 AS/400e System Handbook
#7002 HSL Enabler
The #7002 is a feature High Speed Link (HSL) internal flex cable, which enables connection
to a #5075 PCI Expansion Tower. It is only orderable on the Model 270 with processor #2248,
#2250, and #2422.
This cable connects the processor via a right angle bus connector to the back of the machine.
Two HSL cables (#14XX) are required to connect the system unit to the expansion tower.
On processor upgrades from #2248, #2250, or #2422 to other processor features, marketing
configurators RPO remove the #7002 to remove this feature from the inventory records.
#7104 System Unit Expansion
The #7104 is a feature system unit expansion that allows up to an additional 12 disk units to
be added to the Model 270. The #7104 has no PCI card slots and no removable media slots.
The #7104 comes with support for six disk units standard and requires a #7123 when
installing over six disk units.
The #7104 disk units are driven by a disk unit controller located in the system unit.
One line cord must be ordered with the #7104.
The #7104 does not attach to the HSL interface.
Maximum of one #7104 per Model 270.
There is a prerequisite of a #7133 on processors #2248, #2250, and #2422.
#7123 DASD Expansion Unit
The #7123 is a concurrent maintenance DASD 6 Position expansion feature, which may be
ordered to support an additional six disk units (for a total of 12) in the #7104 on the Model
270.
The prerequisite is a #7104 on the Model 270 and two #2763s or one #4748 in the Model 270
system unit.
#7127 DASD Expansion Unit
The #7127 is a concurrent maintenance DASD 6 Position expansion feature, which may be
ordered to support an additional six disk units (for a total of 12) in the Model 820 system
unit/CEC.
The prerequisite is one #2763 or #4748 disk unit controller in the Model 820 system unit and
the #5157 Feature Power Supply.
To Next Page
Loading...
Need help?
General