Towers
214 AS/400e System Handbook
#5074 PCI Expansion Tower
The #5074 is attached to Models 820, 830 and 840 for adding up to 45 disk units, up to 11
PCI IOA and up to two removable media units. The #5074 includes #9691 bus adapter to
provide the HSL interface to the system. Configurator adds #9691 to the order.
Marketing configurators specify the #5074 over the #5075 and the #5079 when a PCI
Expansion Tower is required.
Select two (any combination) of the following HSL cables for the first tower of an HSL loop.
For additional towers on an HSL loop, select one HSL cable per tower.
• #1460 - 3m Copper HSL cable
• #1461 - 6m Copper HSL cable
• #1462 - 15m Copper HSL cable
Select one of the following SPCN cables per tower:
• #1463 - 2m SPCN cable
• #1464 - 6m SPCN cable
• #1465 - 15m SPCN cable
• #1466 - 30m SPCN cable
#5074 has a #9943 Base PCI IOP. It also has PCI slots for up to 11 PCI IOAs, space for up to
45 disk units (15 are “base”, 30 additional with #5101), space for two removable media
devices, one battery backup, and redundant/hot swap power supplies.
#5074 is capable of controlling Ultra2 SCSI disk units.
The #5074 PCI Expansion Tower supports one 32-bit and seven 32/64-bit PCI slots.
On new orders, select one line cord with each #5074 PCI Expansion Tower.
Note: Some countries offer fewer choices of line cords and some countries are shipped a
default line cord type.
The 11 PCI IOAs are supported (driven) by feature #2843 PCI IOP(s), #9943 Base PCI IOP,
or Feature #2790 Integrated Netfinity Servers.
The mounting for the first 15 disk units is included in the #5074 (base). The mounting for the
next 30 disk units is optional by ordering feature code #5101 30 Disk Expansion Feature.
The #5074 also supports up to two removable media devices (internal tape or CD-ROM).
These removable media devices are supported by the same #4748 PCI RAID Disk Unit
Controller, which supports the first set of 15 disk units.
To Next Page
Loading...
Need help?
General