74
Diagnostics Tools
IMPORTANT: This manual is intended to test the IBM Machine Types 6266, 6270, 6276, 6279, 6280 and 6286.Testing devices which are
not included with the original product package, including other IBM products, prototype cards, or modifying hardware settings
may give false errors and invalid system responses. The diagnostics not specifically made for this model may also report
incorrect errors and information.
The diagnostics program comes on a CD (compact disk) along with this book. This version of PC-Doctor diagnostics program, developed by
Watergate for IBM, is the primary method of testing the computer. You can use it to test the IBM components of the system and some
external devices. The amount of time required to test components depends on the number of components installed and selected. The more
devices you have attached to your system and selected in PC-Doctor, the longer the testing will take.
Using Diagnostics Program from Recovery CD
1. Insert the recovery CD into the CD-ROM drive then restart computer.
2. Press F1 during POST to enter BIOS Setup menu. Select and enter “BIOS Features Setup”, set “Boot Sequence to CD-ROM, A, C”.
Save and exit from BIOS Setup.
3. When screen prompts to install original software, type N to exit the installation program. Then type PCDR and press Enter to start the
diagnostics program. Follow the instructions on the screen to operate the diagnostics program.
To Next Page
Loading...
Need help?
General
