Removing the air baffle from an 8247-42L, 8286-41A, or 8286-42A system
Use this procedure to remove the air baffle from an 8247-42L, 8286-41A, or 8286-42A system.
To remove the air baffle, complete the following steps:
1. Ensure that you have the electrostatic discharge (ESD) wrist strap attached. If not, attach it now.
2. Pull the air baffle to disengage it from the chassis clasp (A).
3. Lift the air baffle up to remove it.
Figure 149. Closing the air baffle
Common procedures for installing, removing and replacing disk drives or solid-state drives 165
To Next Page
Loading...
Need help?
General