4. Grasp the PCI riser-card assembly at the blue tabs and lift to remove the PCI
riser-card assembly.
5. Place the PCI riser-card assembly on a flat and static-protective surface.
6. Carefully grasp the adapter by its top edge or upper corners, and pull the
adapter from the PCI riser-card assembly.
Results
If you are instructed to return the adapter, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Figure 146. Cable removal
Figure 147. Adapter removal
Chapter 6. Removing and replacing components 249
To Next Page
Loading...
Need help?
General