Icom IC-7610 User Manual

4-7
4-6 DIGI-SEL ADJUSTMENTS
• Touch [DSEL ALL] on the main menu screen.
ADJUSTMENT ADJUSTMENT ITEM DISPLAY SETTING CONDITION OPER ATION
PREPARATION 1 – • No test equipment is connected to
neither [ANT1] and [ANT2].
Touch [DIGI-SEL ALL] to start
the DIGI-SEL adjustment.
DIGI-SEL
ADJUSTMENT
2 DIGI-SEL ALL adjustment menu – Touch [SET].
(Two beeps sound 50 minutes
later.)
3 Verify the message, "DIGI-
SEL ALL=OK," is displayed.
• After the adjustment, the transceiver shows the DIGI-SEL ALL adjustment menu.
• Push [EXIT] to return to the menu screen.

Icom IC-7610 Specifications

General

Brand	Icom
Model	IC-7610
Category	Transceiver
Language	English