Icom IC-A25C User Manual

6
WAYPOINT NAVIGATION
6-3
Flying following a ight plan
The transceiver assists you to navigate following a
selected ight plan.
D Selecting a ight plan
1. Open the “Select FPL” screen.
( [MENU] > WPT Navigation > FPL Navigate >
Select FPL)
• Flight plans are displayed.
2. Select a flight plan, and then push [ENT].
• Waypoints contained in the ight plan are displayed.
3. Select a waypoint, and then push [ENT] to display
the Waypoint Navigation screen. The transceiver
starts to navigate to the next waypoint.
4. Fly to the waypoint by checking the direction using
the Waypoint Navigation screen.
D Reversing a ight plan
You can reverse the selected ight plan, to follow it
back to the starting waypoint.
z After selecting a ight plan, select “Reverse Route,”
and then push [ENT].
• The transceiver starts to navigate to the next waypoint.
NOTE:
When you come about 0.5 nm closer to the
waypoint, the transceiver automatically starts
navigating to the next waypoint.
L The function works only on the Nomal type Waypoint
Navigation screen.
L You can turn OFF the function on the Menu screen.
( [MENU] > WPT Navigation > Settings > Auto Change)
When the function is OFF, push [F], and then push
[FPL] to display the waypoints contained in the ight
plan, and then select the next waypoint.
Selecting a waypoint (Continued)
D Selecting a waypoint near your position
1. Push [F], and then push [ ] to display the “Direct-
To WPT” screen.
2. Select “Near Waypoint,” and then push [ENT].
• The transceiver searches for waypoints.
• The “Near Waypoint” screen is displayed, if waypoints
are found.
3. Select a waypoint, and then push [ENT].
• The “Course To” screen is displayed.*
4. Enter the course, and then push [ENT].*
• The Waypoint Navigation screen is displayed.
D Setting a waypoint manually
1. Push [F], and then push [ ] to display the “Direct-
To WPT” screen.
2. Select “Manual Entry,” and then push [ENT].
• The “Latitude” screen is displayed.
3. Enter the latitude, and then push [ENT].
• The “Longitude” screen is displayed.
4. Enter the longitude, and then push [ENT].
• The “Magnetic Vari” screen is displayed.
5. Enter the magnetic variation, and then push
[ENT].
• The “Course To” screen is displayed.*
6. Enter the course, and then push [ENT].*
• The Waypoint Navigation screen is displayed.
D Selecting a waypoint from history
1. Push [F], and then push [ ] to display the “Direct-
To WPT” screen.
2. Select “History,” and then push [ENT].
• The “History” screen is displayed.
3. Select a waypoint, and then push [ENT].
• The “Course To” screen is displayed.*
4. Enter the course, and then push [ENT].*
• The Waypoint Navigation screen is displayed.
* The course entry is required only when the CDI type
Navigation screen is selected.

Icom IC-A25C Specifications

General

Purpose	Aviation Service (Air Band)
Operating frequency	118.000 – 136.992 MHz
Display type	LCD
Display diagonal	2.3 \
Battery type	BP-288
Battery life (max)	10.5 h
Battery low indication	Yes
Number of batteries supported	1
Product color	Black
Operating temperature (T-T)	-10 - 60 °C
Number of batteries included	1 pc(s)
Antenna connector type	FA-B02AR

Weight and Dimensions

Depth	31.8 mm
Width	58.9 mm
Height	148.4 mm
Weight	384 g