Icom IC-F2000 Service Manual

1-1
SECTION 1 SPECIFICATIONS
MODEL VERSION
FREQUENCY
COVERAGE (MHz)
CORRESPONDING
MEASUREMENT STANDARD
IC-F2000
EUR-09
400~470
EN 300 086, EN 300 296
UK-09
EXP-09 RSS -119
IC-F2000S
EUR-09
EN 300 086, EN 300 296
UK-09
EXP-09 RSS -119
IC-F2000T
EUR-09
EN 300 086, EN 300 296
UK-09
EXP-09
RSS -119
EXP-10
IC-F2000
EXP-11 450~520 TIA-603 equivalentIC-F2000S
IC-F2000T
IC-F2000
AUS-09 400~470
AS/NZS 4295
IC-F2000S
IC-F2000T
IC-F2000
AUS-10 450~520IC-F2000S
IC-F2000T
IC-F2000
UAS-07 400~470 TIA-603, RSS-119IC-F2000S
IC-F2000T
IC-F2000
USA-08 450~512 TIA-603IC-F2000S
IC-F2000T
■
GENERAL
• Frequency coverage: See the table shown above.
• Number of conventional channels: 16 channels (Non-display type)
128 channels (4-key and 10-key types)
• Type of emission: Wide 16K0F3E (25.0 kHz) (EN 300 086, EN 300 296, AZ/NZS 4295)
Middle 14K0F3E (20.0 kHz) (EN 300 086, EN 300 296)
Narrow 11K50F3E (12.5 kHz) (TIA-603, RSS-119)
8K50F3E (12.5 kHz) (EN 300 086, EN 300 296, AZ/NZS 4295)
• Antenna impedance: 50 Ω (nominal)
• Operating temperature range: −25ºC~+55ºC (EN 300 086, EN 300 296)
−30ºC~+60ºC (−22ºF~+140ºF) (TIA-603, RSS-119, AZ/NZS 4295)
• Power supply voltage: Specified Icom's battery packs only, 7.5 V DC (negative ground)
• Current drain (approximate):
Receiving 80 mA (stand-by)
500 mA (at maximum audio, with the internal speaker)
Transmitting 1300 mA (at 4 W)
• Dimensions (projections not included):
With BP-278 52.2 (W)×111.8 (H)×22.3 (D) mm, 2.1 (W)×4.4 (H)×0.9 (D) inches
With BP-279 52.2 (W)×111.8 (H)×24.5 (D) mm, 2.1 (W)×4.4 (H)×1.0 (D) inches
With BP-280 52.2 (W)×111.8 (H)×30.3 (D) mm, 2.1 (W)×4.4 (H)×1.2 (D) inches
• Weight (approximate): With BP-278 230 g, 8.1 oz
With BP-279 240 g, 8.5 oz
With BP-280 270 g, 9.5 oz

Icom IC-F2000 Specifications

General

Brand	Icom
Model	IC-F2000
Category	Transceiver
Language	English