TABLE OF CONTENTS
i
IMPORTANT
Versions of the IC-F3/IC-F4 which display “CE” on the serial num-
ber seal, comply with the essential requirements of the 89/336/EEC
directive for Electromagnetic Compatibility.
IMPORTANT ..........................................................................i
CAUTIONS ............................................................................i
TABLE OF CONTENTS .........................................................i
1 GETTING STARTED .........................................................1
2 PANEL DESCRIPTION .....................................................2
3 DEALER-PROGRAMMABLE FUNCTIONS .................3–6
‘ General........................................................................3
‘ Functions.....................................................................4
4 CONVENTIONAL OPERATION ....................................7–8
5 SmarTrunk II
TM
OPERATION .....................................9–10
6 OPTIONAL INSTALLATION............................................11
7 BATTERY PACKS.....................................................12–16
‘ Battery pack replacement..........................................12
‘ Cautions ....................................................................12
‘ Charging....................................................................14
8 SPECIFICATIONS AND OPTIONS .................................17
‘ Specifications ............................................................17
‘ Options ......................................................................17
SmarTrunk II
TM
is a trademark of SmarTrunk Systems,Inc.
READ ALL INSTRUCTIONS carefully and completely before
using the transceiver.
SAVE THIS INSTRUCTION MANUAL. This manual contains
important safety and operating instructions for the IC-F3,
IC-F3S,
IC-F4 and IC-F4S.
CAUTIONS
NEVER allow the antenna to come close to, or touch, ex-
posed body parts, especially the face or eyes while transmit-
ting.
NEVER disassemble the transceiver. Incorrect reassembly
may result in a fire hazard or electric shock.
NEVER operate the transceiver near unshielded electrical
blasting caps or in an explosive area.
AVOID the use of chemical agents such as benzene or al-
cohol when cleaning—use a water-dampened cloth only.
For U.S.A. only
Caution: Changes or modifications to this transceiver, not ex-
pressly approved by Icom Inc., could void your authority to
operate this transceiver under FCC regulations.
To Next Page
Loading...
Need help?
General
