9
3
PREPARATIONS
■ Entering the ATIS ID (For NLD and FRG
versions)
The Automatic Transmitter Identication System (ATIS) ID consists of 10 digits. You can
enter the ID in the “ATIS ID Input” item on the Menu screen.
This ID entering can be done only once.
After entering, it can be changed only by your dealer or distributor. If your ATIS ID has
already been entered, doing the steps below is not necessary.
1. Push [MENU].
• The Menu screen is displayed.
2. Push [▲] or [▼], or rotate [DIAL] to select “ATIS ID
Input,” then push [ENT] to start entering.
• The “ATIS ID Input” screen is displayed.
3. Enter your ATIS ID.
4. Repeat step 3 to enter all 10 digits.
5. Push
to set the entered ID.
• The “Conrmation” screen is displayed.
6. Enter your ATIS ID again to confirm.
7. Push
to set the entered ID.
• When your ATIS ID is successfully entered, the
screen displays “ATIS ID registered successfully.,”
and then enters the operating screen.
L You can check the ATIS ID in “Radio Info” on the
Menu screen.
TIP:
• Select a number using [◄] and [►].
• Push [ENT] or [CH/ENT] to enter the selected
number.
• Select “←” or “→” on the screen, or rotate [CH/
ENT] to move the cursor.
To Next Page
Loading...
Need help?
General
