Icom IC-R2 User Manual

25
10
OTHER FUNCTIONS
■ Set mode
Set mode is used for programming infrequently changed val-
ues or conditions of functions.
In addition, this receiver has an expanded set mode which is
used for programming additional infrequently changed values
or conditions of functions. When turning OFF the expanded
set mode, only a quarter of the set mode items are displayed
for simpler operation.
D Expanded set mode ON/OFF
q Push [V/M] for 2 sec. to enter set mode.
w Rotate [DIAL] clockwise until “EXPAND” appears.
•“EXPAND” disappears after 1 sec. and “EX” appears.
e While pushing [FUNC], rotate [DIAL] to turn the expanded
set mode ON or OFF.
r Push [V/M] to exit set mode or rotate [DIAL] to select a set
mode item.
DSet mode items
E: Appears when expanded set mode is ON.
B: Does not appear within the broadcast band (0.495–1.620 MHz)
except for U.S.A. and Canada versions.
Tuning step
(p. 7)
Dial select step
(p. 26)
Tone squelch
(p. 22)
Tone squelch
tone (p. 22)
Duplex direction
(p. 24)
Offset frequency
(p. 24)
Scan resume
time (p. 18)
Scan pause
time (p. 18)
Priority watch
(p. 21)
Confirmation
beep (p. 26)
Backlighting
(p. 11)
Auto power OFF
(p. 27)
Power save
(p. 26)
Monitor switch
action (p. 27)
Dial speed
(p. 28)
Lock function
effect (p. 28)
Channel indication
mode (p. 29)
E
E
E
E
E
E
E
E
E
E
B
B
B
B
E
E
Expanded set
mode (p. 25)
Expanded set mode setting Expanded set mode ON

Icom IC-R2 Specifications

General

Brand	Icom
Model	IC-R2
Category	Receiver
Language	English