16
4
BASIC OPERATION
■ Power ON
Push [POWER] for 1 sec. to turn
power ON
.
■ Setting a frequency
D Via the keypad
q Push [D.
CLR
] to select VFO mode, if necessary.
w Enter 6 digit, starting from the 100 MHz digit, to enter the de-
sired frequency.
• When
[#•
ENT
] is pushed after three or more digits are entered,
the frequency is also set.
• When a digit is mistakenly input, push
[D.
CLR
] to abort inputting.
•“2” and “7” are acceptable for the 1 kHz digit (depending on the
10 kHz digit).
To Next Page
Loading...
