53
11
OTHER FUNCTIONS
■ CPU reset
The function display may occasionally display erroneous informa-
tion (e.g. when first applying power). This may be caused externally
by static electricity or other factors.
If this problem occurs, turn power OFF. After waiting a few seconds,
turn power ON again. If the problem persists, perform CPU reset-
ting operation as follows.
• While pushing [SQL] and [D•
CLR
], turn power
ON.
CAUTION:
Resetting the CPU returns all programmed con-
tents to their default settings.
AT
POWER ON
IC-T3H.qxd 03.2.6 10:19 Page 53 (1,1)
To Next Page
Loading...
Need help?
General
