20
4
BASIC OPERATION
■ Display type
The transceiver has 3 display types to match your operating style.
The display type is selected in the
INITIAL SET MODE
(p. 50).
“Frequency Indication” type is used for basic
amateur radio operation.
“Channel Indication” type is used to simplify
operation. In this mode only pre-programmed
memory channel numbers are displayed.
VFO mode cannot be selected.
• When the channel indication type is selected, only the following func-
tions can be performed.
- Scan function (p. 29)
- Output power setting (p. 18)
- DTMF memory function (p. 27)
- Key lock function (p. 19)
- Scan pause timer setting, function key timer setting and LCD
backlight setting in
SET MODE
(p. 46)
“Channel Name Indication” type is used to
simplify operation the same as above. In this
mode pre-programmed memory channel
names are displayed.
VFO mode selectable.
• Programmed frequency is indicated when the channel name is not
pre-programmed in the selected memory channel.
• Push and hold [SQL] to display the operating frequency.
USING
INITIAL SET MODE
IC-T3H.qxd 03.2.6 10:18 Page 20 (1,1)
To Next Page
Loading...
Need help?
General
