■ General
The ANI (Automatic Number Identification) function is a
method of selective calling which features an answer back
function. This allows you to confirm whether or not a call has
reached the receiving party, even if the operator is temporar-
ily away from the transceiver.
In order to use the IC-V8000’s ANI function, the following
items and operation are necessary.
• UT-108
DTMF DECODER UNIT
• ANI code programming (via transceiver or PC, using the
optional CS-V8000
CLONING SOFTWARE
)
• HM-118TN/TAN or HM-133V
Once ANI mode is selected, the transceiver cannot be used in
frequency indication mode unless frequency indication mode
is selected (initial set mode or PC cloning), or the CPU is
reset.
ANI selective code (push [PTT])
Beep Beep
Beep
Answer back (automatic)
Disconnect code ([PTT]+[#])
Confirmation code (automatic)
Connection code (push [PTT])
Beep Beep
Beep
Communication
To Next Page
Loading...
Need help?
General
