Icom IP100H User Manual

4
CALLING OPERATION
4-2
Calling procedures outline
q Select a desired address book. (p. 4-3)
• Push [ ] several times.
• Select “All” for all terminals calls, “Group” for group calls,
“Talkgroup” for talkgroup calls, “Individual” for individual
terminal calls, or “Telephone” for telephone calls.
• Selectable address books may differ, depending on the
IP1000C's settings.
• You may select “Talkgroup” by pushing [FUNC], depend-
ing on the IP1000C's settings. (p. 4-7)
w Select a desired address (ID) or extension number.
(p. 4-3)
• Push [J] or [K] several times.
• Selectable IDs or extension numbers may differ, depend-
ing on the IP1000C's settings.
• You can select a desired ID or extension number from the
call history by pushing [
]. (p. 4-7) Selectable logs may
differ, depending on the IP1000C's settings.
e If you want to send a message (p. 4-6), or make an
area call (p. 4-9), push [FUNC] several times.
• Select “Message” to transmit a message, or “Area Call”
for an Area Call.
• Push [J] or [K] several times to select a desired mes-
sage.
• Selectable messages may differ, depending on the
IP1000C's setting.
• When Area Call is selected, push [J] or [K] to select
ON.
r Push [PTT] to make a call.
t Hold down [PTT], and speak at your normal voice
level.
y Release [PTT] to listen.
u Repeat the steps t and y until you finish your con-
versation.
i To hang up a telephone call, push [Option].
• The function assigned to [Option] may differ, depending
on the IP1000C's settings. (p. 5-2)
• Ask your system manager which function is assigned.
For your information
When the VOX function or full-duplex mode is set in the
IP1000C, steps t and y are not necessary.
When the VOX function is set, speak into the headset
microphone to transmit, then stop speaking to listen.
In full-duplex, you can speak and hear the other person
at the same times.
NOTE: Use one of the following options for full-duplex
operation.
• HM-153LS
• HM-166LS
• HM-183LS
• HS-85 with OPC-2144
• HM-153 with OPC-2144
• HM-166 with OPC-2144
• HS-102 with OPC-2359
[PTT]
[Option]

Icom IP100H Specifications

General

Brand	Icom
Model	IP100H
Category	Two-Way Radio
Language	English