IDEAL LOGIC COMBI ESP1 30 Installation And Servicing

25
Installation and Servicing
FLUE OUTLET
SECTION 2 - INSTALLATION
Note.
A at or pitched roof ashing plate (not supplied) is required before proceeding
with the installation of this kit.
This kit is suitable for both at and pitched roof terminations, using a concentric
ue to run vertically from the top of the boiler and terminating above roof level.
Connection to the top of the boiler is made using the supplied vertical
connector.
WEATHER PROOFING
Where the ue passes through the roof line an adequate seal must be made.
This is achieved by using either:
- Flat roof weather collar
or
- Universal weather collar.
ACCESSORIES
Flue Duct Extension Kits are available for ue lengths extending beyond 1m.
These packs contain 1m extension ducts and may be cut to the desired length.
If the offset vertical option is used an Elbow Kit is required.
Please visit www.idealboilers.com to access the Flue and Accessories Guide
for this boiler.
2.12 FITTING THE OPTIONAL ROOF FLUE KIT (FLAT OR PITCHED)

IDEAL LOGIC COMBI ESP1 30 Specifications

General

Brand	IDEAL
Model	LOGIC COMBI ESP1 30
Category	Boiler
Language	English