IDEAL Logic Plus Combi C 24 User Manual

19
Installation and Servicing
SECTION 2 - INSTALLATION
2.3 POD DOOR & FRONT PANEL REMOVAL
POD DOOR
1. Squeeze the two tabs forward and lift the pod door
upwards to remove.
BOILER FRONT PANEL
1. Loosen the 2 screws retaining the front panel.
2. Pull the two clips downwards to disengage.
3. Pull the front panel forward and upwards to remove.
Pack B Contents Telescopic
A Telescopic ue terminal
B Flue turret
C Rubber terminal wall seal
D Screw
E Sealing Tape
F Wall Seal (white)
D
C
A
E
F
B
Pack B Contents Non-Telescopic
A Flue terminal
B Flue turret
C Rubber terminal wall seal
D Cutting Aid
E Wall Seal (white)
UNPACKING CONT’D
A
D
B
CE
1
Note. This ue system incorporates a removable ue outlet nose that utilises a push t location system. This enables the
installation of deector, high level, soft or balcony outlet ue kits without the removal of the whole ‘B’ pack terminal. The
appliance must not be operated without the desired outlet nose correctly tted in place.
Note. Location dimples must be aligned with terminal mounting frame.
1
2
INSTALLATION

IDEAL Logic Plus Combi C 24 Specifications

General

Brand	IDEAL
Model	Logic Plus Combi C 24
Category	Boiler
Language	English