Introduction to the IDS806
The IDS806 Control Panel is manufactured to the highest specification and will provide
many years of service if correctly installed and maintained. The unit is designed for
simple operation yet provides the maximum protection for you, your family, or business.
For trouble free operation, please follow the instructions contained in this User Manual.
Your security system consists of a control panel, one or more keypads and various
sensors and detectors. An enclosure will contain the control panel which includes the
system electronics and standby battery. There is normally no reason for anyone other
than the installer or service professional to have access to the control panel.
Notes
1. This alarm is to be installed and maintained by an IDS trained installer.
2. Read the entire manual carefully and keep it in an accessible place.
3. Your security system should be installed and serviced by a qualified security
professional who should instruct you regarding the level of protection provided
and the operation of the system.
4. Should you have any questions regarding the operation of the system, contact
your security company representative.
5. Your system should be tested on a regular basis. Before testing the system, please
notify your security company of your intention to do so.
6. NEVER disconnect the mains power, as the back-up battery will eventually
discharge thereby causing the control panel to shutdown.
7. A security system cannot prevent emergencies. It is only intended to alert you and
- if included - your security company of an emergency situation.
8. Smoke and heat detectors may not detect all fire situations.
To Next Page
Loading...
Need help?
General
