SETTING UP THE AUTO EMPTY BASE 8
5
About your Auto Empty Base
The Auto Empty Base is designed to automatically empty and charge the iHome Autovac Nova. Plug the power cable into the back panel of the
Base and plug the other end in a functioning wall outlet. Place on a flat, hard surface at least 2.5 inches away from the wall. Ensure that there is a
clear space in front and both sides so that your Autovac Nova can return to Base to re-charge and empty.
2.5 inches from the wall
How to place your Auto Empty Base
NOTE: The Auto Empty Base must always remain connected
to power. Avoid using a power source that may inadvertent-
ly be switched off (e.g. power strip, outlet controlled by a
light switch, GFCI)
To Next Page
Loading...
Need help?
General
