1: Make sure your mobile device is connected to Wi-Fi
• Make sure that the Wi-Fi network is not 5G (the app only supports 2.4G network)
• The name & password of the Wi-Fi network cannot contain any special characters
iHOME CLEAN APP - WI-FI CONNECTION 11
5: Go to Wi-Fi settings on your device and select “Autovac Nova”
6: Re-open the iHome Clean App & wait for the connection to complete
2: Open the iHome Clean App, select “Add device” and select Nova
4: Select your 2.4G Wi-Fi network and enter the password
3: Press & hold & simultaneously for 5 seconds to enter network
config mode
NOTE: Ensure that you have a strong
Wi-Fi signal in the location of your
setup/charging base
To Next Page
Loading...
Need help?
General
